Usage - Klarstein VINSIDER 89T Bedienungsanleitung

EN
34
Upper control panel
1 Start/Stop button
2 Light button
3 Compressor operation indicator
4 Digital display of the temperature in the upper zone
5 Digital display of the temperature in the middle zone
6 Setting button for the upper zone
7 Setting button for the middle zone
Lower control panel
8 Display screen for lower zone
9 To increase temperature by 1 °C in lower zone
10 To decrease temperature by 1 °C in lower zone

USAGE

Starting up the device
Once the wine cabinet is properly installed, we advise that you clean the inside
using warm water with a low concentration of dishwashing liquid. Do not use
abrasives or scouring powder; they may scratch the surface finish.
• Your wine cabinet is ideally suitable for holding Bordeaux type bottles of 0.75
L capacity. It can contain larger bottles; however care must be taken that they
do not prevent the door from closing properly.
• When closing the door ensure that it does not touch any of the bottles.
• If you load several bottles at a time, it will take longer before the cabinet
reaches the desired temperature.
• In order to avoid damaging the door seal, ensure that the door is fully open
before moving the racks along the compartment rails.