Hilti C 4/36-MC4 Original Bedienungsanleitung Seite 15

3 Description
3.1 Overview of the product
3.2 Intended use
The product described is a battery charger for Hilti Li-ion batteries with a rated voltage of 7.2 to 36 volts. It
is designed to be connected to power outlets providing an AC voltage (alternating current) of 100 to 240 V
(depending on country-specific version).
A list of the batteries approved for use with this product can be found at the end of this document.
3.3 Information displayed
3.3.1 Information displayed by the charger and battery
The supply voltage LED lights when the charger is plugged in and ready for operation.
Battery charge state
LEDs
­
Off
LEDs 1 to 4 blink first and
then light to indicate the
battery's state of charge.
Off
Off
Off
3.3.2 Li-ion battery charge state display
Status
3 LEDs light, 1 LED blinks.
2 LEDs light, 1 LED blinks.
1 LED lights, 1 LED blinks.
*2114855*
1
@
;
=
%
&
(
)
Charge status LED Battery temperature
LED
Off Off
Off Off
Blinks Off
Lights Off
Off Blinks
Off Lights
2
Meaning
Charge state: 75 % to 100 %
Charge state: 50 % to 75 %
Charge state: 25 % to 50 %
2114855
Release button with additional function
(state-of-charge display activation)
Battery
Battery state-of-charge LEDs
Supply voltage LED
State-of-charge LED
Battery temperature LED
Battery interface 1
Description
No battery is inserted.
Battery is inserted and
ready to charge.
The battery is charging.
The battery is fully charged.
Battery temperature is
outside the permitted range
(too hot, too cold).
Battery malfunction,
charger malfunction.
English 11