Important Information Regarding Function Buttons - AGFEO ST 15 Bedienungsanleitung

Important Information Regarding
Function Buttons
The LED's of the function buttons are updated by transmitting a series of DTMF tones. The-
se tones are within an audible range! The volume of these DTMF tones cannot be reduced. In
default the updating of function buttons is carried out constantly (even when the phone is in
use).
The within audible range transmitted signals, during a telephone conversation, can be
switched off by using TK-Suite under „Extensions/Devices: Analogue /Charges/Flash/Clip".
Please note that such setting will only update the function buttons after call completion.
Alternatively you may set the updating of Function Button LED's as described below:
+ S705
Pick Up Handset Enter Programming
Mode
+ S7892 z
Pick Up
Handset
+ S700
Pick Up End Programming
Handset Mode
Q
Confirmation Tone, (you may
have to enter system PIN here if
required)
2 = Update during connection ON
1 = Update during connection OFF
Q
Confirmation Tone
-
Replace
Handset
Q -
Confirmation Replace
Tone
Handset
-
Replace
Handset
31