Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
To ensure that the di erent surfaces are not damaged by using the wrong
cleaning agent, observe the information in the table. Depending on the
appliance model, not all of the areas listed may be on/in your appliance.
Caution!
Risk of surface damage
Do not use:
1.
Harsh or abrasive cleaning agents.
2.
Cleaning agents with a high alcohol content.
3.
Hard scouring pads or cleaning sponges.
4.
High-pressure cleaners or steam cleaners.
5.
Special cleaners for cleaning the appliance while it is hot.
Wash new sponge cloths thoroughly before use.
Tip
Highly recommended cleaning and care products can be purchased through
theafter-sales service.
Observe the respective manufacturer's instructions.
Area Appliance exterior
Appliance exterior
Stainless steel front
Plastic
Painted surfaces
Control panel
Hot soapy water:
Clean with a dish cloth and then dry with a soft cloth.
Remove flecks of limescale, grease, starch and albumin (e.g. egg
white) immediately.
Corrosion can form under such flecks.
Special stainless steel cleaning products suitable for hot surfaces
are available from our after-sales service or from specialist retailers.
Apply a very thin layer of the cleaning product with a soft cloth.
Hot soapy water:
Clean with a dish cloth and then dry with a soft cloth. Do not
use glass cleaner or a glass scraper.
Hot soapy water:
Clean with a dish cloth and then dry with a soft cloth.
Hot soapy water:
Clean with a dish cloth and then dry with a soft cloth. Do not use
glass cleaner or a glass scraper.
Cleaning
23
Werbung
Inhaltsverzeichnis
