Preparing The Card Remote Commander; Setting The Clock - Sony CDX-H910UI Bedienungsanleitung

Preparing the card remote
commander
Remove the insulation film.
Tip
For how to replace the battery, see page 22.

Setting the clock

The clock uses a 12-hour digital indication.
1
Press and hold (SELECT/ENTER).
The setup display appears.
2
Press (SELECT/ENTER) repeatedly until
"CLOCK-ADJ" appears.
3
Press (SEEK) +.
The hour indication flashes.
4
Rotate the control dial to set the hour
and minute.
To move the digital indication, press (SEEK)
–/+.
5
Press (SELECT/ENTER).
The setup is complete and the clock starts.
To display the clock, press (DSPL). Press
(DSPL) again to return to the previous display.
7