Control Panel - AVENLI SPA5 Benutzerhandbuch

Usage

Control panel

Filtration
Heat Button
Massage Button
Lock Button
Functions
Once powered-up, the LED displays the current water temperature automatically.
The temperature units selector changes the temperature units from Celsius
degrees to Fahrenheit degrees.
Press the temperature adjustment buttons, then the screen will flash. When it is
flashing, you can set the desired temperature. The value will increase or
decrease 1 degree at once. The temperature could be set between 30°C to 40°C
(86°F to 104°F).
To lock or unlock the control panel, press the Lock button and hold 3 seconds.
Lock the control panel when you are away to prevent other people come to
change your settings.
Press the massage button to activate the bubble massage system, the green
indicator light turns on. It can be turned off by pressing it again.
Note:
The massage system will stop automatically after 30 minutes of operation.
-
Re-activate the massage function by pressing the massage button again.
When filter button is on, pressing bubble button will exchange filter mode
-
into massage mode: filter indicator light will turn off and massage
indicator light turn on. If press the bubble button again, the massage
mode will be changed back to filter mode.
LED Display
Temprerature
units indicator
16
Temperature
Increase Button
Temprerature
units selector
Temprerature
Decrease Button