Control Panel - AVENLI SPA3 Benutzerhandbuch

13) Put the filter cartridge
in the
support then screw it
onto the lower
suction inside the basin.
Usage

Control panel

Filtration
Heat Button
Massage Button
Lock Button
Functions
Once powered-up, the LED displays the current water temperature automatically.
The temperature units selector changes the temperature units from Celsius
degrees to Fahrenheit degrees.
Press the temperature adjustment buttons, then the screen will flash. When it is
flashing, you can set the desired temperature. The value will increase or
decrease 1 degree at once. The temperature could be set between 30°C to 40°C
(86°F to 104°F).
14) Ensure that the drain
caps are properly closed
before before filling the spa.
LED Display
Temprerature
units indicator
15) Smooth wrinkles out of
the bottom of the spa,
then fill the spa to the
level indicated. Your spa is
ready.
Temperature
Increase Button
Temprerature
units selector
Temprerature
Decrease Button