AVENLI SPA5 Benutzerhandbuch Seite 14

Assembling
The number of persons required for installation: 1 adult at least.
10 minutes for site preparation and water filling.
1) Choose a flat and level
location.
4) Adjust the 8 segments
until they form a perfect
round shape. Then, ensure
that the holes for the
outer liner connection and
the holes in the foam wall
are still aligned.
7) Locate the place where
the two zippers are
aligned, connect them
first.
2) Extend the liner to the
chosen area.
5) Install the connecting
hose on the liner.
8) When installed at corner,
push PE foam inward so
that the coat can be
installed in place
14
3) Add the foam wall
segment with the three
holes in it for connection to
the base liner.
6) Insert the inner liner of
your spa.
9) Make sure that the
zippers of the liner and
outer liners are aligned
before zipping them up