Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Breakdown of product parts
7
Blades and grille assembly
1.
Unscrew the blade nut (6) clockwise and the grille nut (3)
counterclockwise, then remove both.
2.
With the locking tab facing up, place the rear grille in the proper
position.
3. Screw the grille nut (3) tightly to secure the rear grille (2).
4. Remove the protective sleeve from the motor shaft (4).
5. Install the blades (5) on the motor shaft (1) until it reaches the
retaining pin.
6. Screw the blade nut (6) counterclockwise onto the motor shaft (1).
7.
Unscrew the locking screw (8) from the rear grille (2). Then fi t the
front grille (7) into the rear grille (2). Secure them tightly using a
screwdriver to tighten the locking screw (8).
6
5
4
3
2
8
1
1. Motor shaft
2. Rear grille
3. Rear grille nut
4. Protective shaft sleeve
5. Blades
6. Nut for blades
7. Front grille
8. Locking screw
21
|
Werbung
Inhaltsverzeichnis
