Assembly Procedure For Lens (Revised Version) - Panasonic DMC-TZ30EB Servicehandbuch

9.5.

Assembly Procedure for Lens (Revised Version)

9.5.1. Insert the Straight Frame
Insert the Straight Frame into the Both Side Cam Frame as below.
(The phase difference between the two marks is about 90 degrees.)
*The mark of the Straight Frame is under the Shading Sheet.
Insert the Bayonet Key of the Straight Frame into the Bayonet Inlet of the Both Side Cam Frame.
(Pass the convexity of Bayonet Inlet through the concavity of Bayonet Key.)
Turn the Straight Frame about 90 degrees in the arrow direction so that the mark of Straight Frame comes
close to the mark of Both Side Cam Frame.
*As the drawing below indicates, align the Grooves of Straight Frame with the one of Both Side Cam Frame.
40