Panasonic DMC-TZ30EB Servicehandbuch Seite 43

9.5.3. Insert the 1st Lens Frame Unit and the Outside Cam Frame Unit
Insert the 1st Lens Frame as the drawing below indicated.
Pass the Cam Pin of the "LEICA" side of the 1st Lens Frame Unit through the Area of Cam Pin Insertion near the
Side Cam Frame Unit
1. Move the mark of the Both Side Cam Frame Unit closer to the
Lens Frame Unit just a bit in the arrow direction.(about 2 degrees)
*Hold the Cam Pin of the Both Side Frame Unit close to the Straight Key of the Straight Frame Unit.
2. Insert the Straight Key and the Cam Pin into the following grooves.
(1)The Straight Key of the Straight Unit -> The groove for the Straight key of the Outside Cam Frame Unit
(2)The Cam Pin of the Both Side Cam Frame Unit -> The groove for the Cam Pin of the Outside Cam Frame Unit
mark of the Outside Cam Frame Unit, then turn the 1st
43
mark of Both