Panasonic DMC-TZ30EB Servicehandbuch Seite 21

3. Error Code List
The error code consists of 8 bits data and it shows the following information.
Attribute Main item Sub item
LENS Lens drive OIS
Zoom
(C.B.)
Focus
Lens
Error code
High 4bits Low 4 bits
18*0 1000 PSD (X) error. Hall element (X axis) position detect
error in OIS unit.
OIS Unit
2000 PSD (Y) error. Hall element (Y axis) position detect
error in OIS unit.
OIS Unit
3000 GYRO (X) error. Gyro (IC7101) detect error on Main
P.C.B.
IC7101 (Gyro element) or IC6001 (VENUS ENGINE)
4000 GYRO (Y) error. Gyro (IC7101) detect error on Main
P.C.B.
IC7101 (Gyro element) or IC6001 (VENUS ENGINE)
5000 MREF error (Reference voltage error).
IC9101 (LENS drive) or IC6001 (VENUS ENGINE)
6000 Drive voltage (X) error.
LENS Unit, LENS flex breaks, IC6001(VENUS
ENGINE) AD value error, etc.
7000 Drive voltage (Y) error.
LENS Unit, LENS flex breaks, IC6001(VENUS
ENGINE) AD value error, etc.
0?10 Collapsible barrel Low detect error
(Collapsible barrel encoder always detects High.)
Mechanical lock, FP9005-(11) signal line or IC6001
(VENUS ENGINE)
0?20 Collapsible barrel High detect error
(Collapsible barrel encoder always detects Low.)
Mechanical lock, FP9005-(11) signal line or IC6001
(VENUS ENGINE)
0?30 Zoom motor sensor error.
Mechanical lock, FP9005-(6), (9) signal line or
IC6001 (VENUS ENGINE)
0?40 Zoom motor sensor error. (During monitor mode.)
Mechanical lock, FP9005-(6), (9) signal line or
IC6001 (VENUS ENGINE)
0?50 Zoom motor sensor error. (During monitor mode with
slow speed.)
Mechanical lock, FP9005-(6), (9) signal line or
IC6001 (VENUS ENGINE)
0?60 Phase error or operation failure of zoom Lens/motor/
encoder. (IMPACT)
Mechanical lock, zoom encoder.
0?01 HP High detect error
(Focus encoder always detects High, and not
becomes Low)
Mechanical lock, FP9005-(11) signal line or IC6001
(VENUS ENGINE)
0?02 HP Low detect error
(Focus encoder always detects Low, and not
becomes High)
Mechanical lock, FP9005-(11) signal line or IC6001
(VENUS ENGINE)
18*1 0000 Power ON time out error.
Lens drive system
18*2 0000 Power OFF time out error.
Lens drive system
Contents (Upper)
Check point (Lower)
21
Error Indication
Detecting Part/Circuit
device
OIS X LENSu NG
OIS Y
GYRO X GYRO NG
GYRO Y
OIS REF LENSSd/DSP
NG
OISX REF LENSu/LENS
FPC
OISY REF
ZOOM L ZOOMm/
LENSu
ZOOM H
ZOOM ENC
FOCUS L LENS FPC/
DSP
FOCUS H
LENS DRV LENSu