Panasonic DMC-TZ30EB Servicehandbuch Seite 13

• Step 4. Display the "INITIAL SETTINGS" menu:
Note: If the unit is other than PROGRAM AE mode, it does not display the initial settings menu.
While keep pressing MENU/SET and "RIGHT of Cursor button" simultaneously, turn the Power SW off.
The "INITIAL SETTINGS" menu is displayed.
There are two kinds of "INITIAL SETTINGS" menu form as follows:
[CASE 1. After replacing MAIN P.C.B.]
There are four kinds of menu from as follows:
[Except for "DMC-TZ30EG, EF, EB and EP" models : (VEP56159A is used as a Main P.C.B.)]
When Main P.C.B. has just been replaced, all of the model suffix are displayed as follows. (Four pages in total)
[Only for "DMC-TZ30EG, EF, EB, EP and TZ31EG" models : (VEP56159B is used as a Main P.C.B.)]
When Main P.C.B. has just been replaced, the following model suffix are displayed as follows. (Two pages in total)
To display the "TZ31" model suffix, choose the "EG" area and press the DELETE button.
[Only for "DMC-TZ27EB and EC" models : (VEP56159C is used as a Main P.C.B.)]
When Main P.C.B. has just been replaced, the following model suffix are displayed as follows. (Two pages in total)
[Only for "DMC-ZS19P and ZS20GK" models : (VEP56159D is used as a Main P.C.B.)]
When Main P.C.B. has been replaced, the following model suffix are displayed as follows. (Four pages in total)
13