Panasonic DMC-TZ30EB Servicehandbuch Seite 47

9.5.7. Insert the Master Flange Unit
Note: (When Installing)
Refer to "The Application of Grease Method" when installing
the Master Flange Unit.
Take Care not to damage the flex.
Take Care not to tuck in to the Master Flange Unit, When
inserting the Shutter Flex.
1. Turn the Drive Frame Unit to the Wide position as below.
2. Push the Hole of the Shutter Flex to the Boss of the
Master Flange Unit tightly.
3. Place the Shutter Flex following the Guide of the Fix Cam
Frame, and install the Master Flange Unit to the Unit of
Fix Cam Frame Unite, Drive Frame Unit, Decorative
Frame Unit, Outside Cam Frame, 1st Lens Frame Unit,
2nd Lens Frame Unite, 3rd Lens Frame Unit, Straight
Frame and Both Side Cam Frame.
4. Turn the Drive Frame Unit to the completely retracted
position.
5. Join the Zoom Motor Unit to the Boss, and install to the
Fix Cam Frame.
47