Set-Up - Renkforce SAP-702 Bedienungsanleitung

• Do not place any open sources of fire such as burning candles on the device.
• Consult an expert when in doubt as to the operation, the safety or the connection of the device.
• Do not operate the device unattended.
• Only use the device in a moderate climate, and avoid a tropical environment.
• Do not leave packaging material unattended. It may become a dangerous toy for children.
• Please observe the additional safety instructions in each individual section of these operating instruc-
tions as well.
• Comply with the safety and operating instructions of any other appliances that are connected to the
device.
• If you are not sure about the correct connection or if questions arise which are not covered by the opera-
ting instructions, please do not hesitate to contact our technical support or another specialist.

5. Set-Up

When selecting the installation site, consider the room conditions, meaning the location of the next outlet, etc. Also
prevent direct sunlight, vibrations, dust, heat, cold and dampness. Keep the device away from strong transformers
or motors.
Place the miniature amplifier on a stable, horizontal surface. There must be enough space
around the device for air circulation to permit dissipation of the generated heat. Therefore, only
place the miniature amplifier on a level surface and not on carpets, etc. Do not cover up the
ventilation slots in the casing.
If you do not heed these instructions, the device may be damaged.
Do not drill extra holes or screw any extra screws for mounting purposes into the case. This
will damage the device.
Because of the variety of used lacquers and polishes for furniture, the device base might leave residues
on furniture due to a chemical reaction. Therefore, the device should not be placed on valuable furniture
surfaces without suitable protection.
19