Heating; Using The Saunum Sauna Climate Function; Configuring The Sauna - Saunum LEIL Installations- Und Bedienungsanleitung

HEATING

1. Tap the screen to get started.
Setting a sauna ready time.
The "sauna ready" time is when the sauna's
steam zone temperature has reached the
selected temperature level (heating starts
approximately 1.5 hours earlier).
2. Tap the "Start" button to start heating
the sauna.
16
While the sauna is in heating mode, it is
possible to change the duration of the sau-
na session, and the temperature by tapping
on the duration and temperature controls
and selecting the desired numbers.
USING THE SAUNUM
SAUNA CLIMATE
FUNCTION
WARNING! The climate function should
not be used while heating the sauna
steam zone, as it can result in a pro­
longed heating time and potential over­
heating.
Use the climate device function of the sau-
na steam zone ONLY when using the sauna.
To protect the sauna from overheating, the
climate device can also start independently.
Do not use the climate function unattended.
CONFIGURING
THE SAUNA
Saunum's control unit LEIL is constantly
being developed to add new functions
that make the user experience more
comfortable. Saunum notifies its cus­
tomers of all software updates. The
updates require an internet connection
to download. In order to keep the soft­
ware on your device up­to­date when
it's not permanently connected to a
Wi­Fi network, you need to create an
internet access point with your mobile
phone.
When installing the device for the first
time, be sure to enable access to the
internet and download the updates.
1. The "Set up" option will show on the
first run. Tap "Set up" to begin the setup
process.
Set up
2. Connecting to Wi­Fi.
Select the appropriate Wi-Fi network by
tapping on the corresponding network
name. If there is no need to connect the
sauna control panel to the Wi-Fi network,
tap the "Skip" button.
Install the control panel in a location
with a good Wi­Fi connection. You can
ensure an adequate Wi­Fi connection
with your phone:
• Disable the mobile data on your
phone.
• Turn on your phone's Wi-Fi.
• The Wi-Fi connection at the instal-
lation location is adequate if the
Wi-Fi connection of your phone is
good, and the applications that re-
quire data transfer work properly.
If the connection is not adequate:
• Try another location.
• If possible, change the location of
your Wi-Fi router so that the con-
nection to the Saunum Wi-Fi con-
trol panel is better.
The building structure, building mate­
rials, flush mounting, and other issues
may reduce the quality of the Wi­Fi con­
nection.
Tip! A Wi-Fi network extender can be used
to enhance the network reach.
The Saunum Wi-Fi control panel is desig-
ned to control the electric sauna heater.
17