Weh TSA1 H2 Betriebsanleitung Seite 42

AE Operating instructions
Assembly of the filter (Pos� 3) for TSA1 H
Î
Place the new back-up ring
onto the new/cleaned filter
(Pos. ).
Î
Insert the new pressure
spring into the receptacle.
Î
Place the new/cleaned filter
(Pos. 3) onto the pressure
spring in the receptacle.
Î
Lubricate the thread of the
lower part using a brush and
WEH Lubricant part no.
®
74725.
Î Screw in the receptacle and
the lower part.
Tightening torque 60 Nm
Page 42
MD-10086-L51-R2.2.0-03
70MPa
2