Weh TSA1 H2 Betriebsanleitung Seite 37

Disassembly of the filter (Pos� 3) for TSA1 H
Î
Unscrew the breakaway coupling from the fueling station.
Î
Remove the receptacle insert (Pos. 7) from the breakaway coupling. Please note
Chapter 7.3 Removing the receptacle insert (Pos. 7) from the coupling body on page
26.
Î
Tighten the coupling body on
the receptacle in a vice with
aluminium jaws.
Î
Unscrew the lower part with
an open-ended spanner insert
AF36.
Î
Remove the filter
(Pos. 3) with the back-up ring
from the receptacle.
Î
Remove the pressure spring
from the receptacle.
Operating instructions
70MPa
2
MD-10086-L51-R2.2.0-03
AE
Page 37