BOMANN GSP 7408 Bedienungsanleitung, Garantie Seite 35

General information!
• The ECO program is suitable for cleaning normally soiled dishes, which is the most efficient program in
terms of combined energy and water consumption. The program is used to check compliance with EU
ecodesign legislation.
→ Informationen for the comparability test:
Capacity: 13 settings; Position of upper basket: lower position; Rinse aid setting: max; Softener setting: H3
• Loading the domestic dishwasher to the specified capacity helps to save energy and water.
• Manual pre-washing of the dishes leads to higher water and energy consumption!
• Washing dishes in a household dishwasher generally uses less energy and water than hand washing,
provided the dishwasher is used according to the instructions.
Operating overview
1 Power: button for switching the power supply
on/off.
2 Child lock: keep pressing button combination
for several seconds to activate/deactivate the
child lock. All buttons, except power button, are
locked for operation.
3 Loading: button for activating/deactivating the
½ loading function. Consider that the function is
program dependent!
4 Delay: button for selecting the start delay of
1-24 hours. Set the operating conditions and start
the rinsing program. The appliance starts auto-
matically after the selected time has elapsed.
5 Program: button for selecting the rinsing pro-
gram.
6 Start/pause: button for starting/interrupting the
selected or running rinsing program.
7 Control lamp: lights up when the water supply
is closed.
Warning lamp: lights up when rinse aid needs
to be refilled.
Warning lamp: lights up when dishwasher salt
needs to be refilled.
8 Display: the salt consumption (water hardness)
and the start delay are selected via the display.
The start delay (when activated), the remaining
program time and any error codes are displayed.
9 The program indicator lights show the selection.
Starting a program
• The water supply must be opened to the maxi-
mum pressure.
• Load the dishwasher baskets.
• Fill in the detergent.
• Switch on the appliance.
• Set the required program options.
• Start the operation.
35