Intended Use; General Instructions; Safety Instructions; Hazard Levels - Kärcher WPD 200 Advanced Bedienungsanleitung

Contents
General instructions ............................................
Safety instructions...............................................
Intended use .......................................................
Function ..............................................................
General instructions for handling CO
Environmental protection ....................................
Scope of delivery ................................................
Accessories and spare parts...............................
Consumables ......................................................
Description of the device.....................................
Installation...........................................................
Initial start-up ......................................................
Handling the CO bottle .......................................
2
Operation ............................................................
Transport.............................................................
Storage ...............................................................
Care and service.................................................
User menu ..........................................................
Troubleshooting guide.........................................
Warranty..............................................................
Technical data .....................................................
Maintenance sheet WPD 200 .............................

General instructions

Read the original instructions before us-
ing the unit for the first time and act in
accordance with it. Keep the original in-
structions for future reference or for future owners.
● Only drinking water from a public water supply can
be used to guarantee the water quality of the emerg-
ing water. The quality must at least correspond to
the guidelines of the World Health Organization
(WHO).
● If intervention in the drinking water network is nec-
essary in order to install the unit, this must be done
by a trained specialist who is authorised to do this
according to the laws and regulations valid for the
location. When installing the device, the applicable
national regulations for interventions in the drinking
water network must be observed. The work must be
commissioned by the customer if required.
● For protection against water damage caused by a
burst water hose, we recommend installing a shut-
off device and an aqua stop (optionally available) in
the water supply line.
● Maintenance work in the interior of the unit may only
be carried out by the operator of the unit who has
read these operating instructions.
● When using a CO bottle, the locally applicable
2
rules for marking the installation room must be ob-
served.
● Do not clean the unit with a water jet.
● Plastic surfaces must not be cleaned with alcohol-
based, aggressive or abrasive detergents. The sur-
face cleaner CA 30 R (6.295-686.0) is recommend-
ed.
● After initial start-up, filter changes and long down-
time periods, dispensed unchilled water may tempo-
rarily be milky in appearance. This is due to small air
bubbles in the water and does not affect water qual-
ity.

Safety instructions

Hazard levels

DANGER
●Indication of an imminent
threat of danger that will lead to
severe injuries or even death.
WARNING
●Indication of a potentially dan-
gerous situation that may lead
to severe injuries or even
death.
CAUTION
●Indication of a potentially dan-
gerous situation that may lead
to minor injuries.
ATTENTION
●Indication of a potentially dan-
17
17
gerous situation that may lead
17
to damage to property.
18
bottles..... 18
Safety instructions
2
18
18 DANGER ● Risk of electric
18
shock. Always pull out the mains
19
19
plug before working on the de-
19
vice. The socket must be pro-
19
20
tected with a 30 mA fault current
21
protection switch. ● Danger to
21
21
life due to bursting CO
22
Place the CO
22
24
and secure it. Always connect
25
25 the CO
2
26
reducer with safety valve ap-
proved for the type of device.
Protect the CO
cessive heat and never expose
it to direct sunlight. ● Danger of
explosion. Never connect a
CO bottle with a riser. For ex-
2
ample, riser bottles are marked
with a red warning sticker.
● Danger of suffocation due to
escaping carbon dioxide. En-
sure that the installation room is
adequately ventilated or install a
gas warning system. Observe
the country-specific legal re-
quirements regarding the pre-
scribed minimum room size,
warning systems and ventilation
during the emptying of com-
pressed gas tank. ● Do not store
explosive substances such as
aerosol cans with a flammable
propellant in this appliance.
WARNING ● When position-
ing the appliance, ensure the
supply cord is not trapped or
damaged. ● Do not locate multi-
ple portable socket-outlets or
portable power supplies at the
rear of the appliance. ● Risk of
injury from bursting bottles. Car-
bonated water may only be filled
into pressure-stable bottles (10
bar). ● Keep ventilation open-
ings, in the appliance enclosure
or in the built-in structure, clear
of obstruction. ● Health risk from
germs. Pay attention to hygiene
and cleanliness when replacing
bottle.
2
bottle vertically
2
bottle with a pressure
bottle from ex-
2
English
the filter cartridge. Wear sterile
disposable gloves when chang-
ing the filter. Clean the drip tray
and surfaces regularly. Never
touch the water outlet with your
fingers or a cleaning cloth. Only
clean the water outlet with
RM735 and a sterile cloth. Risk
of injury from the detergent. Ob-
serve the safety instructions for
the detergent and wear safety
goggles and protective gloves
when handling detergents. The
device automatically performs
thermal sanitisation at least
every 4 weeks. When using the
drain can, ensure that it is emp-
tied regularly. If your drinking
water supplier has warned of mi-
crobiological contamination, it is
imperative that sanitisation of
the device is performed after the
warning has been lifted.
● Health risk from hot water.
Take extra care when dispens-
ing hot water. ● Possible health
risk due to increased germ con-
centration in the water if you
have not used the device for
more than 4 days. Therefore, af-
ter a shutdown period of more
than 4 days, carry out thermal
sanitisation before use, see
Chapter "Start-up after shut-
down". ● Health risk due to im-
properly repaired device. The
device may only be repaired by
trained specialist personnel.
ATTENTION ● Damage to the
device cooling unit. If the device
has been stored or transported
lying down, you must place the
device in its normal position and
then wait at least 24 hours be-
fore operating it.
Symbols on the device
WARNING
Risk of fire, Flammable materials
This device uses a flammable cooling
agent.
Keep ignition souces away if cooling agent leaks from
the unit.

Intended use

WARNING
This device is not intended for use by persons (including
children) with reduced physical, sensory or mental ca-
pabilities, unless they are supervised by a person who
is responsible for their safety or have received instruc-
tions from them on how to use the device and have un-
17