Husqvarna S 13 Bedienungsanweisung Seite 7

General
Do a check that the following accessories are included:
• The hose with end fittings
• Steel tube
• Floor Nozzle
• Multi adapter (only S 13/S 26)
If 1 of the parts is missing, speak to your local service
agent or salesman.
For models that do not have the front casters assembled
because of the limit of package:
• Assemble the front casters using the bolt or the nut
and the washer included in the package.
Make sure to dispose the package and the used product
components in correct procedure. Refer to local disposal
regulations. Make sure to recycle.
Introduction
WARNING:
product, carefully read and understand
the safety chapter and the operation
instructions.
Before use
WARNING:
extractor make sure that the power and
voltage corresponds with the voltage shown
on the machines rating plate, including
extension cords.
Grounding instructions
WARNING:
be grounded. If it should malfunction or
breakdown, grounding provides a path
of least resistance for electric current to
reduce the risk of electric shock. The dust
extractor is equipped with a cord having
an equipment-grounding conductor and
grounding plug. The plug must be inserted
into an appropriate outlet that is properly
installed and grounded in accordance with
all local codes and ordinances.
896 - 005 - 01.12.2022
Assembly
Operation
Before you operate the
Before using the dust
The dust extractor must
To attach the suction hose
There is a hose intake with a hose lock on the product.
The hose lock makes sure that the suction hose adapter
do not fall off.
1. Lift the hose lock and attach the suction hose
adapter.
2. Lower the hose lock into the recess of the adapter.
To attach the nozzle on the hand pipe
The floor nozzle has adjustable wheels. Adjust the
wheels to get the best suction effect. Adjust the wheels
with the knob, which is on the rear side of the nozzle.
The wheels and rubber strips of the nozzle can be
replaced. Keep the nozzle in good condition.
To start and stop
Use the switch to start the dust extractor.
Start switch Models with au-
tomatic start
Black - 3 step 0: Motor OFF
I: Motor ON
II: Automatic
start
Red - 2 step
Automatic start function
Models without
automatic start
0: Motor OFF
I: Motor ON
7