Various Machine Modes; Handlebar Adjustment; Frame Height Adjustment - Husqvarna PG280 Bedienungsanweisung

Various machine modes

Operating position
Service position
Tilting transportation position
Lifting transportation position
Put padding between the motor and the electrical cabinet
to prevent damage to the machine.
OPERATING

Handlebar adjustment

The handle can be infinitely adjusted. The handle lock
knobs are operated clockwise, counterclockwise or
placed in idle postion.
• Loosen the lock knobs and adjust the handle to
desired position.
• Fix the position by tightening the lock knobs.
• When not in use, pull the handle lock knobs upwards
and place them into idle position.

Frame height adjustment

The angle of the frame can be adjusted to alter the weight
distribution of the chassis to decrease or increase
grinding pressure. It can also be used to allow a more
comfortable working position for different operators.
• Disconnect the motor cable from the electrical box.
• Loosen the locking knob to adjust the length.
• Choose the appropriate position required by
tightening up the locking knobs in the correct hole.
NOTICE! The lower hole for a higher handlebar and
greater grinding pressure. The upper hole for a lower
handlebar and less grinding pressure.
1
2
–
English 9