Edge Grinding - Husqvarna PG280 Bedienungsanweisung

Edge grinding

This machine has edge grinding capabilities.
For edge grinding close to walls, the hatch on the right or
left side of the dust cover must be removed.
• Remove the screws (2) and the hatch. Fit the hatch on
to the holder.
• Under the hatch there is a removable guard to protect
the wall when grinding. The guard can be removed for
grinding closer next to the wall, 2 screws.
• Raise the foot pedal.
• Use your foot to give the wheels the right angle.
OPERATING
• For edge grinding on the right side, the wheels must
be directed left.
• For edge grinding on the left side, the wheels must be
directed right.
• When the red marking on the wheel axle (A) is in line
with the red marking on the frame (B), the direction is
again straight.
A B
English
–
15