Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
CCE – Cash Concepts Europe GmbH & CCE GmbH
von-Behring-Straße 6a – D-88131 Lindau / Germany
Tel.: +49 (0)8382 – 943 15 – 0 / Fax: +49 (0)8382 – 943 15 – 20
Email: info@cce.gmbh / Web: www.cce.gmbh
Counting Stops (Key BATCH)
You can use the count stops in all counting variants to set after how many counted banknotes the machine should stop. The
counting process continues automatically when the banknotes are removed from the stacker until all banknotes have been
counted or the count stop has been reached again. By pressing the BATCH button several times you can choose between the
pre-programmed values 100 - 50 - 20 - 10 and no count stop "". By pressing the +1/+10 key, you can adjust the values
individually. Pressing it increases the value by 1 and holding it down increases it by 10. You will find the currently set count stop
at the top right of the display.
Add Function (Key ADD)
The CCE 3080 has an addition function that can be used to count several stacks of banknotes in succession and then add up the
results. The activated addition function is shown in the top centre of the display as "ADD". Pressing the ADD button switches the
function on and off.
Setup menu settings
Overview Setup Menu
Press the MENU button to enter the Setup menu. Use the arrow keys to navigate in this menu and the RESET key to confirm a
selection. Press the MENU button to exit a submenu and also the Setup menu.
Limit Set (Setting the functions)
In this area you can make the settings for the individual counterfeit money sensors.
Please note that changes, especially in the level of counterfeit detection, have a major impact on processing.
Sensors
Factory Setting
MG Limit
DD Limit
DB Limit
UV Limit
IR Limit
Slope Limit
Serial Number
AUTO/MNL
AUTO
UV Value
Notes Collect (Scanning of banknotes)
This function can be used to read in banknotes if required and requested by the manufacturer.
Time Set (Date / Time setting)
In this menu you can set the date and time of the machine. Open the menu with RESET and use the arrow keys and RESET to
select whether you want to change the date format (DATE FORMAT) or the time and date (TIME SET). Changes are made using
the arrow keys; use the RESET key to switch between the positions. Press the MENU button to close the settings again.
Speed Set (Setting counting speed)
Under this menu item you can select the desired counting speed. Please note that not all counting speeds are available for all
currencies and counting modes and the machine adjusts the speed accordingly.
P a g e
| 8
5
The higher the set value, the more sensitive the test for this feature.
5
The higher the set value, the more sensitive the test for this feature.
5
The higher the set value, the more sensitive the test for this feature.
5
The higher the set value, the more sensitive the test for this feature.
9
The higher the set value, the more sensitive the test for this feature.
5
The higher the set value, the more sensitive the test for this feature.
ON
Switching the reading of serial numbers on and off.
Setting the automatic or manual start of the counting process
5
The higher the set value, the more sensitive the test for this feature.
Functions
E n g l i s h
Werbung
Inhaltsverzeichnis
