Makita BO4555 Betriebsanleitung Seite 6

For Model BO4555
For European countries only
Noise
The typical A-weighted noise level determined according
to EN60745-2-4:
Sound pressure level (L
Uncertainty (K): 3 dB (A)
The noise level under working may exceed 85 dB (A).
Wear ear protection
Vibration
The vibration total value (tri-axial vector sum) determined
according to EN60745-2-4:
Work mode: sanding metal plate
Vibration emission (a
For Model BO4556
For European countries only
Noise
The typical A-weighted noise level determined according
to EN60745-2-4:
Sound pressure level (L
Uncertainty (K): 3 dB (A)
The noise level under working may exceed 85 dB (A).
Wear ear protection.
Vibration
The vibration total value (tri-axial vector sum) determined
according to EN60745-2-4:
Work mode: sanding metal plate
Vibration emission (a
Uncertainty (K): 1.5 m/s
For Model BO4557
For European countries only
Noise
The typical A-weighted noise level determined according
to EN60745-2-4:
Sound pressure level (L
Uncertainty (K): 3 dB (A)
The noise level under working may exceed 85 dB (A).
Wear ear protection.
Vibration
The vibration total value (tri-axial vector sum) determined
according to EN60745-2-4:
Work mode: sanding metal plate
Vibration emission (a
Uncertainty (K): 1.5 m/s
6
ENG101-1
): 80 dB (A)
pA
ENG212-1
2
): 2.5 m/s or less
h
ENG101-1
): 82 dB (A)
pA
ENG211-1
2
): 3 m/s
h
2
ENG101-1
): 76 dB (A)
pA
ENG211-1
2
): 3.5 m/s
h
2
EC-DECLARATION OF CONFORMITY
Model; BO4555, BO4556, BO4557
We declare under our sole responsibility that this product
is in compliance with the following standards of
standardized documents;
EN60745, EN55014, EN61000 in accordance with
Council Directives, 2004/108/EC, 98/37/EC.
Tomoyasu Kato
Responsible Manufacturer:
Makita Corporation
3-11-8, Sumiyoshi-cho, Anjo, Aichi, JAPAN
Authorized Representative in Europe:
Makita International Europe Ltd.
Michigan Drive, Tongwell, Milton Keynes, Bucks MK15
8JD, ENGLAND
CE 2007
Director
ENH101-8