List Of Pictograms Used; Introduction; Intended Use; Parts Description - LIVARNO LUX 281134 Montage-, Bedienungs- Und Sicherheitshinweise

List of pictograms used

Read the instructions!
Volt (direct current)
Watt (effective power)
Observe the warnings and
safety notices!
This product is not suitable as
residential room lighting.
Accident hazard and risk of fatal
injury for infants and children!
Severe or fatal injuries may
occur.
LED solar light

Introduction

Familiarise yourself with the device be-
fore using it for the first time. In addition,
please carefully refer to the instructions
for use and the safety instructions below. Only use
the product as described and for the indicated pur-
pose. Keep these instructions in a safe place. If you
pass the device on to anyone else, please ensure
that you also pass on all the documentation.

Intended Use

The solar light is intended as outdoor ambient/dec-
orative lighting. The integrated solar cell and the re-
chargeable battery allow usage independent from
the electricity grid. Any modification to the product
are considered improper use and may
result in considerable hazards. The manufacturer
30 GB
Caution! Explosion hazard!
Caution! Fire hazard!
Wear safety gloves!
Caution - Hot surfaces!
Dispose of the packaging and
product in an environmentally-
friendly manner!
Improper disposal of rechargea-
ble batteries may result in
environmental damage!
assumes no liability for damages due to improper
use. This device is not intended for commercial use.

Parts Description

Lamp shade
1
Solar cell housing
2
Lamp body
3
Ground stake (model 10346A / B / C / D)
4
Adapter (model 10346A / B / C / D)
5
Solar cell
6
ON/OFF switch
7
Fastening screw
8
Battery compartment
9
Rechargeable battery
10

Scope of delivery

1 LED solar light
1 Rechargeable Ni-MH battery, AA, 600 mAh,
1.2 V
1 Set of assembly instructions and instructions for use