Replacing The Batteries - PeakTech 4205 Bedienungsanleitung

6. Specifications
Functions
A AC
50 – 400 Hz
True RMS
Note: Accuracy is expressed as ± (% of reading + the value of the lowest digit) at
23°C ± 5°C, at a relative humidity of less than 80%RH. The measured
conductor is in the centre of the coil.
Output noise:
Max. output
voltage:

7. Replacing the batteries

1. Switch off the meter and remove all test leads from the input
sockets
2. Remove the battery compartment screw on the back to open the
battery compartment
3. Replace the 2 x 1.5V AAA batteries with new ones of the same
type
4. put the battery compartment back on the unit and secure it by
turning the screw clockwise
Range Measuring range
0,30 A – 30,00 A
30 A
30,0 A – 300,0 A
300 A
300 A – 3000 A
3000 A
<5,5 mV
5,8 V
Output
100 mV/A
10 mV/A
1 mV/A
20
Accuracy
 3,0% + 5 mV
 3,0% + 3 mV
 3,0% + 3 mV