PeakTech 4205 Bedienungsanleitung Seite 14

General:

Read these operating instructions carefully and make them
available to subsequent users.

Be sure to observe the warning notices on the device; do not
cover or remove them.

Pay attention to the use of the current clamp and use it only in
its appropriate overvoltage category.

Familiarise yourself with the functions of the measuring device
before you carry out the first measurement.

Do not operate the measuring device unattended or only
protected against unauthorised access.

Use the current clamp only for its intended purpose and pay
particular attention to warnings on the device and information
on the maximum values.
Electric safety:

Voltages over 25 VAC or 60 VDC are generally considered
dangerous voltages.

Work on dangerous voltages only by or under the supervision
of qualified personnel.

When working on dangerous voltages, wear suitable protective
equipment and observe the relevant safety rules.

Do not exceed the maximum permissible input values under
any circumstances (risk of serious injury and / or destruction of
the device)

Pay special attention to the correct connection of the test leads
depending on the measuring function in order to avoid a short
circuit in the device. Never apply a voltage in parallel to the
current sockets (A, mA, µA).
13