Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
inaccurate measurement results. Electric shocks and physical
damage can result.
If you are not going to use the device for a longer period of
time, remove the battery from the compartment.
Maintenance and repair work on the current clamp may only be
carried out by qualified personnel.
Do not lay the device upside down on the workbench or work
surface to avoid damaging the control elements.
Clean the housing regularly with a damp cloth and a mild
cleaning agent. Do not use any caustic abrasives.
Do not make any technical changes to the device.
1.1 Introduction
This innovative current clamp works on the principle of being able to
carry out current measurements safely and quickly in conjunction
with a multimeter. Due to the flexible design of the clamp opening, it
is possible to insert small but also large cable diameters into the
opening. By means of the slide switch, it is possible to set the
measuring ranges of the current clamp between 30 / 300 and 3000 A
AC. Due to the intuitive design of the device, this current clamp is
suitable for all areas in which currents have to be measured,
whether in the hobby area or for professional use in industry.
15
Werbung
Inhaltsverzeichnis
