How To Use; Water Tank Filling; Steam Ironing - Zelmer ZIR3210 Benutzerhandbuch

AF-MANUAL_Plancha-ZIR3210 performance.pdf
BEFORE ITS FIRST USE
Before using the steam iron, please ensure you read the user manual and understand all parts and
features of the steam iron. Be sure to remove any packaging material and labels before using for the first
time.
In the first use they can break off odors or fumes that sent quickly. Do not spray for the first time on clothes
and there may be traces of dirt on the soleplate.

HOW TO USE

Always check whether a label with ironing instructions is attached to an article to be ironed. Follow these
instructions in all cases.
Turn the temperature control dial round to set the appropriate temperature indicated in ironing instructions
or in fabric label.
Marking
(1 dot)
•• (2 dots)
••• (3 dots) / MAX
C
Anti-shine
M
Y
Insert the main plug into the wall socket. The indicator light will turn on and will start blinking. Once the
CM
selected temperature is reached, the light will be fixed and you will hear an acoustic sound, indicating you
may start ironing.
MY
CY

WATER TANK FILLING

CMY
Unplug the iron before filling the water tank.
K
The device is designed for use with tap water. If the water in your area is hard or semi-hard use mix tap
water with distilled or demineralized water purchased in stores, in the ratio 2:1 and 1:1 respectively
(distilled water: tap water). Check with your water supplier to determine the type of water in your area.
Never use 100% distilled or demineralized, rain water, softened water, scented water, water from other
appliances such as refrigerators, air conditioners, dryers or other types of home water preparation water.
Open the cover for filling.
Slowly pour water through the water inlet.
Do not fill higher than mark on the water tank, in order to avoid spilling out of water. The water tank should
be emptied after each use.
SPRAYING
As long as there is enough water in the water tank, you may use the spray button at any temperature
setting during steam or dry ironing.
Press the spray button several times to activate the pump while you are ironing.

STEAM IRONING

Set the temperature control dial to the desired position in accordance with the manufacturer's label. The
LED of the selected temperature will start blinking until the temperature is reached. Then the LED will
11 8/4/21
Material, for example
Acetate, elastane, polyamida, polypropylene
Cupro, polyester, silk, triacetate, viscose, wool
Cotton, linen
Specially to prevent glare on dark and delicate garments
15:09
EN
11