PNI DS890 Benutzerhandbuch Seite 10

the radio transmits and receives from the same channel.
• When B appears on the screen next to the channel number,
the radio is transmitting and receiving from an inter-frequency
channel.
• When neither A nor B is displayed next to the channel
number, the respective channel is only for transmission, not
for the reception.
• Consult the frequency table at the end of the manual.
3. AL
• If the NRC function is enabled on the receiving radio, the
alarm audio signal (CALL) will not be heard, but this will not
affect its reception. The screen of the receiving radio will light
up and show the reception indicator.
4. LO, MI, HI, TX, RX
• LO - low emission power
• HI - average emission power
• HI - high emission power
• TX - transmission
• RX - reception
5. 21 - Indicates the channel number.
6.
• Key Lock function is enabled.
7. M
• Shown next to the channel saved in Favorites.
8. NRC
• NRC (Noise Reduction Circuit) function is enabled.
CAN/INT/USA:
9.
• Indicates the channel group: INT (International), CAN
(Canada), USA (United States of America).
10. DUAL
• Dual Watch function is enabled.
English
10