Installation; Transport And Storage; Cleaning And Maintenance; Disposal - hymer Backrack+ Number & Lightbar Sicherheits- Und Montageanleitung

INSTALLATION

Note regarding installation
Note regarding screws with thread-locking fluid:
Screw in the screws as far as they will go and tighten
them with the specified torque.
Preparation installation only by specialist dealers.
Required tools
• Torx spanner T40X
• Torque spanner
- Extension
- Size 13
Installation
See page 12.
X

TRANSPORT AND STORAGE

Store the rear carrier system / accessories in a dry, clean
X
and frost-free place.

CLEANING AND MAINTENANCE

Tighten the fastening screws at regular intervals.
X
Regularly clean the rear carrier system/accessories with
X
warm water and suitable cleaning agents, at the latest
after exposure to salt water. Do not use aggressive
cleaning agents.
Do not clean the rear carrier system/accessories in car
X
washes.

DISPOSAL

All components of the rear carrier system/accessories are
100% recyclable and can be handed over to appropriate
collection points for recycling.
Dispose of luminaires/lamps properly as electronic
X
waste.
Backrack+ Backrack+
EN
7 7