About This User Information; Safety; Intended Use; Foreseeable Misuse - hymer Backrack+ Number & Lightbar Sicherheits- Und Montageanleitung

ABOUT THIS USER INFORMATION

EN
This user information is intended for the responsible
vehicle driver/owner. Read the user information carefully
before installing and using the product.
Keep this user information in the vehicle and pass it on
X
when the owner changes.
When installing and using the product, observe all
X
the vehicle manufacturer's instructions (see vehicle
manual).
We reserve the right to make changes with regard to de-
sign, equipment and colour. Illustrations are non-binding.

SAFETY

Intended use

The Backrack+ Number & Light Bar is designed to be
installed on vehicle model Fiat Ducato X250 and vehicles
with the same body. It serves as a duplicate for lights or
number plates in case they are covered by the Backrack+
when loaded. It can be folded down and can also be used
as a step (max. 100 kg).
Any other use is considered improper. The Backrack+
Number & Light Bar is referred to in the following as the
rear carrier system/accessories.
It may only be used if vehicle parts (lights, indicators,
X
number plates) are obscured by additional compo-
nents and thus a duplicate number plate is necessary.
Only install the rear carrier system/accessories in accor-
X
dance with the installation instructions.
Only use original accessories and original spare parts.
X
Check with the respective manufacturer regarding the
suitability of any other accessories.
The driver of the vehicle is responsible for the rear
X
carrier system/accessories and for compliance with the
relevant regulations.
In the event of improper installation, use or use that
deviates from the user information or use that is not in
accordance with the intended purpose, all guarantee and
warranty claims against the manufacturer will be voided.

Foreseeable misuse

• The rear carrier system/accessories are not designed for
installation by children or youth.
• If conversions and modifications are made to the rear
carrier system/accessories, the type approval is voided.
• Installation without Backrack+ is not permitted.
6 6
• If the rear carrier system/accessories are used as a step,
do not load them with more than 100 kg.
• Driving into car washes with the mounted components
installed is not permitted.
• Driving in the folded down position is not permitted
(see step position graphic 4).

General safety instructions

When using the rear carrier system/accessories, ensure
X
that the national laws of the respective country are
complied with.
Replace damaged parts immediately with original
X
spare parts. Do not use a damaged rear carrier system/
damaged accessories for transporting bicycles.
Check the functionality of the lighting before every
X
journey.
Fold up the Backrack+ Number & Light Bar before
X
setting off.

Residual risks

Danger of accident due to incorrect installation
Due to incorrect installation, the rear carrier system/ac-
cessories or load can come loose during travel and cause
accidents.
Check all bolted connections for damage, firm hold and
X
proper fit for the first time after initial assembly, after a
short travel distance (approx. 50 km) and then before
all travel, and tighten if necessary. Replace damaged
parts immediately with original spare parts.
Danger of slipping in wet conditions.
X
SCOPE OF DELIVERY AND SPARE PARTS
LIST
Check delivery for damage and completeness after un-
X
packing. Report any defects to the dealer immediately.
Backrack+ Backrack+