Technical Specifications; General Specifications - Environment Conditions; Measurement Specifications - Kometec MD 9273 Bedienungsanleitung

MD 9273 Leakage Clamp

4 Technical Specifications

4.1 General specifications – Environment conditions
Measurement category clamp-meter
Measurement category test lead
Maximum current
2
Pollution degree
Operation
Altitude
Operation temperature
Storage temperature
Temperature coefficient:
Functioning principle:
Data update on screen:
Screen:
Range selection:
Over-range indication:
Polarity indication:
E.M.C.:
Safety:
Bluetooth®:
Power supply:
Type of batteries:
Consumption:
Duration of the batteries:
Dimensions:
Weight:

4.2 Measurement specifications

Current and voltage support automatic ranging within the same function.
This equipment cannot be exposed to currents above the limit
2
CAT III 600V
CAT III 600V
100 A
2
Indoor
< 2000 m
0 ºC – 40 ºC (<80 % H.R., <10 ºC without
condensation)
10 ºC – 60 ºC (<70 % H.R., extract batteries)
0.1 (of specified precision) / ºC (<18 ºC or >28 ºC)
Sampling the signal at high speed
Twice a second
3 3/4 + 3 digits LCD screen
Automatic and manual selection
-0L- is shown on the LCD screen, fast beep
"-" is shown automatically
Emmission: Class B
Immunity: Portable test and measurement
equipment
Meets EN 61326-1:2013, EN 61326-2-2:2013
Meets EN 61010-1:2010, EN 61010-2-32:2012,
EN 61010-2-033:2012, EN 61010-031:2015
v3.0
3 V
2 x 1,5 V AA alkaline batteries
5 mA average, depending on function.
50 mA average in Bluetooth® mode
200 - 400 h (batteries 2000 mAh)
20 – 40 h (Bluetooth® mode)
185 mm x 62 mm x 42 mm
Approx. 210 g (without battery)
23
Technical Specifications