Kometec MD 9273 Bedienungsanleitung Seite 18

MD 9273 Leakage Clamp Description of Test Functions
128 Hz Current measurement (Current functions only)
There is a notch filter at 128 Hz frequency. The instrument filters the rest of frequency spectrum out. This
function is used in conjunction with other Metrel® Instruments or a signal generator for cable tracking.
DC measurement (Voltage functions only)
In this function, the DC value of the waveform is shown. This mode is entered by pressing the AC/DC button
in the TRMS measurement function screen. To change back to AC, press the same button again.
18