Standby Mode; Standard Accessories - Kometec MD 9273 Bedienungsanleitung

MD 9273 Leakage clamp
BLINK
Inputs
Table 4 describes the inputs' function.
Input
COM
V

Standby Mode

If the clamp-meter is not in use for a period of 15 minutes, the screen goes blank and the clamp-meter goes
into standby mode. To wake the meter from standby mode, turn the rotary switch to OFF position and then
back to the desired function to reactivate the screen. The Standby mode is disabled during active Bluetooth®
connection with other instrument.

Standard accessories

• Test probes,
• Crocodile clamps,
• Batteries (2 AA 1,5V batteries),
• Instruction manual,
• Carrying Case.
Low battery.
Battery is close to empty.
Table 3: LCD screen indications
Description
Common reference for voltage and power measurements; use black probe.
Voltage and power measurements active line input; use red probe.
Table 4: Inputs
12
Instrument Description