Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Display Codes
OL Indicates an overload condition. The load is too great for the mixer and must
be reduced. Press the power button and enter in new parameters and start.
OH Indicates an overheat condition. The operating conditions have caused the
mixerto overheat. Reduce mixer loads and/or environmental temperature to
continue mixing. To reset mixer turn power off, allow mixer to cool and then
turn back on.
Cleaning and Service
Cleaning
Unplug mixer prior to cleaning. Using a mild soap and water solution, wipe the
housing and control panel of the mixer with a damp cloth. Do not use chlorine
bleach, chlorine-based cleanser, abrasives, ammonia, steel wool, or scouring
pads with metal content or similar harsh solvents or abrasives. These may
damage the surface of the mixer
Service
Do not attempt to service or repair mixer. If the mixer housing is opened, the
warranty becomes void. Contact Supplier for return authorization and return
instructions. Clean the mixer so that it is free from any materials which may be
harmful. Provide an SDS or other safety data sheets for all chemicals used in
conjunction with this mixer where appropriate. Place the mixer and its parts into
the original packing to protect and prevent damage during transport. Follow
shipping directions provided when return is authorized and RMA issued.
CAUTION:
Failure to clean, service, and handle the mixer as outlined above can cause it
to fail which could impair the safety of the user.
Warranty and Product Liability
Warranty
Cole-Parmer warrants the herein described product of its manufacture
for three years from receipt of the equipment by the purchaser, against
defects in material and workmanship.
11
Werbung
Inhaltsverzeichnis
