WARNING! Risk of burns!
You can burn yourself on projector parts which have become hot.
▶ Let the device cool for at least 10 minutes before any set-up work.
WARNING! Op�cal radia�on hazard!
Op�cal radia�on can cause temporary or permanent eye damage.
▶ Never stare directly into the beam of light.
•
Switch on the projector.
5.3. Adjus�ng the focus of the mo�f
1. Loosen the knurled screw.
2. Reposi�on the projec�on lens within the holder un�l
the projected image is in focus.
3. Fasten the knurled screw.
5.4. Aligning the projected image
1. Loosen the knurled screw un�l the gobo holder can be
rotated.
2. Rotate the gobo holder un�l the projected image has
been aligned as desired.
3. Fasten the knurled screw.
5.5. Closing the projector housing
•
Screw the shell on the projector head.
24 / 44
Se�ngs
Derksen Lich�echnik