MODMO SAIGON S Benutzerhandbuch Seite 5

1.3. How to get your E-bike ready for the road
The following section explains how to get your Saigon E-Bike
ready for riding
Required Tools:
• Allen Key 4-5-6 mm
• Spanner
A. Adjusting the Handle Bar
Step 1. Rotate the handlebars until they
are perpendicular to the wheel and frame
B. Inflate the tyres
• Recommendation: 35 – 45 psi. Riding the E-Bike with tyres over or under pressure may result to faster deterioration and/or damage.
• We recommend to check the air pressure regularly every 2 - 4 weeks, as bicycle tubes inevitably loose air over time, especially
when not used regularly.
Step 2. Tighten the two lateral screws on
the handlebar using the 5mm Allen key
Step 3. Ensure the top-cap is fastened
tight, please be mindful of how tight the
fixture is as it can cause the handlebar to
YOU R B IC YC L E
5