10.1.3 Connect downrod and hanger ball
Release the pin.
The product is supplied with the 10 cm downrod attached. Replace it with the 25 cm rod to fit a higher ceiling.
Insert the canopy, canopy cap, and coupling cover, then
pass the cables through the downrod. 2x holes facing
down, 3x holes facing up.
Tighten the 2x screws.
2x
Loosen the 2x screws.
9
Loosen the screws, attach the downrod frame to the
housing, then tighten.
Slide down.
Replace the pin.
Remove the pin.
Slide the suspension ball
31