operating instructions
4.0 operating instructions
EN
WARNING
!
•
While the appliance is operating, do not remove the glass panel. This will cause the remote control and touch
panel to disfunction.
Once the appliance has been plugged into a grounded electrical outlet, it is ready to operate.
note:
Ensure the house circuit breakers for the power supply are turned on. In the event of a power failure, the
appliance will lose its memory function and will reset to factory mode when the power returns.
4.1
main power button
The main power button is located on the front bottom right side of the appliance.
4.2
operating touch display panel
WARNING
!
•
Do not move or remove the glass panel when the appliance is plugged in and operating. This will cause the
remote control and touch panel to stop functioning.
The touch display panel is shown by LED's on the front bottom right of the appliance. The LED's will
disappear after 10 seconds of no function change. The main power button will be dim.
18
W415-1699 / F / 10.29.21