TFA FUN Bedienungsanleitung Seite 12

TFA_No. 30.5050_Anleit_12_22
FUN – Digital thermo-hygrometer
Important information on product safety!
• Do not expose the device to extreme temperatures, vibrations or
shocks.
• Protect it from moisture.
3. Elements
3.1 Display (Fig. 1)
A 1: DCF reception symbol
A 3: Date
A 5: Indoor humidity
A 7: Max/min values
A 9: Indoor temperature
3.2 Buttons (Fig. 2)
B 1: SET button
B 3: + button
3.3 Housing (Fig. 3)
C 1: Stand (fold out)
C 3: Battery compartment
22
18.12.2022 18:23 Uhr
A 2: Time
A 4: Smiley for the comfort level
A 6: Automatic reset
A 8: Manual reset
A 10: Battery symbol
B 2: MIN/MAX button
C 2: Suspension device
Seite 12
FUN – Digital thermo-hygrometer
4. Getting started
• Remove the protective film from the display.
• Open the battery compartment and insert two new AAA 1.5 V batte-
ries, polarity as illustrated.
• Close the battery compartment again.
• All segments will be displayed briefly.
• The device is ready for use.
4.1 Radio-controlled time reception
• The clock will now scan the DCF frequency signal and the DCF sym-
bol will be flashing on the display.
• All other information disappears from the display. During the DCF
time reception period, no button can be pressed.
• When the time code is successfully received after 3-10 minutes, the
radio-controlled time, the date and the DCF symbol will be shown
steadily on the display.
• The indoor temperature, the humidity and the corresponding smiley
symbol appear on the display.
• Interrupt the reception by pressing the SET button for 3 seconds.
23