Klarstein 10011486 Handbuch Seite 14

Extensible tube
Pic 3
Pic 4
Installation (10011488/10011489/10011490)
1. The cooker hood should be placed at a distance of 65-75cm (26-30inch) from the cooking surface
for the best effect. See Pic 1.
2. Install the hook on a suitable place once the installation height is fixed, and keep it in line. The
fixed position of the inside chimney bracket is the place of chimney.
3. Fix the extensible pipe according to the lead direction and way, and then put the cooker hood on
the hook. See pic 3.
4. Put the glass according to the lead direction and way on the cooker hood, and then use the screws
to fix the glass, also lead the extensible pipe outside of the room, meanwhile adjust the height of
the inside chimney to the position of the inside chimney bracket and fix on it by screw , here
should be sure the inside chimney can be flexed freely. See Pic 4.
5. Put the two chimneys together onto the cooker hood body, meanwhile adjust the height of the
inside chimney into the suitable height, and fix the inside chimney to the inside chimney bracket
by screw. Finally, fix the body with safety screw. See Pic 5.
Note: The two safety vents are positioned on the back casing, with diameter of 6mm.
Inside chimney
Outside chimney
Pic 5
Outside chimney bracket
Safety screw
14