Genmitsu PROVerXL 6050 Plus Benutzerhandbuch Seite 29

Part 2- Mechanical Installation
Installing (OPTIONAL) the 65mm Spindle Holder
What you will need:
Note: The PROVerXL 6050 Plus comes with an extra 65mm spindle holder for installing bigger spindles or trim routers (Sold Seperately)
10 65mm Spindle Holder 26 Allen Wrench 41 (6) M5*12 Socket Cap Screw 45 (2) M5*20 Socket Cap Screw
1. Use the M5*20 Socket Cap Screws to install the 65mm spindle holder on the Z-Axis Gantry Plate.
2. Insert the spindle motor or trim router into the spindle holder and tighten using the M5*20 Socket Cap Screws.
65mm Spindle Holder
or Trim Router
65mm Spindle Holder M5*20 M5*12 Socket Cap Screw
Socket Cap Screw
27