Genmitsu PROVerXL 6050 Plus Benutzerhandbuch Seite 15

Part 2- Mechanical Installation
Installing the Left and Right Gantry Support
What you will need:
45
6 Left Gantry Support 7 Right Gantry Support 26 Allen Wrench (8) M5*20 Socket Cap Screw
The rear of the machine is
towards the stepper motor. Align
Left Gantry
Support
each Gantry support (Left) and
Right Gantry
right to the corresponding holes.
Support
Y-axis Beam
Each support will be angled
towards the read of the machine
as shown in the photo below.
Use the M5*20 Socket Cap
Screws for loose fit-up. Do not
tighten completely.
M5*20 Socket Cap Screw
13