Part 2- Mechanical Installation - Genmitsu PROVerXL 6050 Plus Benutzerhandbuch

Part 2- Mechanical Installation

Installing the Rubber Feet
Installing the rubber feet allows you to move the machine easily. Without the rubber feet installed, the machine
will run more steady. If you would like to install the rubber feet, install them before starting other installation
steps.
What you will need:
Allen Wrench (4) Rubber Feet 45 (8) M5*20 Socket Cap Screw
26 28
Align the rubber feet with the screw holes at the bottom of the frame, lock them with the M5*20 socket cap screws.
Rubber Feet M5*20 Socket Cap Screw
09