Genmitsu PROVerXL 6050 Plus Benutzerhandbuch Seite 12

Part 2- Mechanical Installation
Installing the Y-axis Lead Screw
What you will need:
1 2 35
XY Axis Base Assembly Lead Screw Bearing
1. Install the bearing into the Bearing
circular opening at the center
of the frame.
2. Look for the anti-backlash
XY Axis
assembly on the Y-Axis, press
Base Assembly
the screw nut of the Y-axis to
Lead Screw
compress the spring while you
screw the leadscrew through
the assembly.
Screw Nut
Longer Ends Stepped
10