Genmitsu PROVerXL 6050 Plus Benutzerhandbuch Seite 21

Part 2- Mechanical Installation
Installing the Spindle Holder and the Spindle Motor
What you will need:
52mm Spindle
9 21
Holder
Use the M5*12 Socket Cap Screws to install the 52mm spindle holder onto the Z-Axis Gantry Plate as shown
in the photos below.Insert the spindle motor into the holder and lock it in using the M5*20 Socket Cap Screws.
M5*12 Socket 52mm
Cap Screw Spindle Holder
Spindle Motor 26 Allen Wrench
(4) M5*12 Socket
41
Cap Screw
Spindle
Motor
M5*20 Socket
Cap Screw
(2) M5*20
45
Socket Cap Screw
19