Genmitsu PROVerXL 6050 Plus Benutzerhandbuch Seite 25

Part 2- Mechanical Installation
1. Align the screw holes of the Y-axis limit switch plates with the screw holes of the Y-axis profile, tighten the
M4*10 Socket Cap Screws.
2. Align the screw holes of the drag chain mount-1 with the screw holes of the Y-axis profile and tighten with the
M5*16 Socket Cap Screws.
3. Align the screw holes of the drag chain mount-2 with the screw holes of the left gantry arm and tighten with
the M5*12 Socket Cap Screws.
Y-axis Limit
Switch Plate-1
M4*10
Socket
Cap Screw
M5*16
M5*12
Socket
Socket
Cap Screw
Cap Screw
Y-axis Drag Chain
Y-axis Drag Chain
Mount-1
M4*10
Socket Cap Screw
Y-axis Limit
Switch Plate-2
Mount-2
23