Husqvarna Aspire P5-P4A Bedienungsanweisung Seite 398

• Use a helmet if it is possible that objects can fall on
you.
(Fig. 29)
• Use approved hearing protection.
(Fig. 30)
• Use approved eye protection. If you use a visor,
you must also use approved protective goggles.
Approved protective goggles must agree with the
ANSI Z87.1 standard in the USA or EN 166 in EU
countries.
(Fig. 31)
• Use gloves when it is necessary, for example when
you attach, examine or clean the cutting equipment.
(Fig. 32)
• Use protective boots, or shoes, with non-slip soles.
(Fig. 33)
• Use pants with saw protection.
• Use clothing made of a strong fabric. Always use
heavy, long pants and long sleeves. Do not use
loose clothing that can catch on twigs and branches.
Do not wear jewelry, short pants, open shoes or go
with bare feet. Put your hair up safely above your
shoulders.
• Keep first aid equipment close at hand.
(Fig. 34)
Safety devices on the product
WARNING:
instructions that follow before you use the
product.
In this section the product's safety features, its purpose
and how checks and maintenance should be carried
out to ensure that it operates correctly. See instructions
under the heading Product overview on page 392 to find
where these parts are located on your product.
The life span of the product can be reduced and the risk
of accidents can increase if product maintenance is not
carried out correctly and if service and/or repairs are not
carried out professionally. If you need further information
please contact your nearest servicing dealer.
WARNING:
defective safety components. The product's
safety equipment must be inspected and
maintained as described in this section.
If your product fails any of these checks,
contact your service agent to get it repaired.
CAUTION:
All servicing and repair work
on the machine requires special training.
This is especially true of the machine's
safety equipment. If your machine fails
any of the checks described below you
398
Read the warning
Never use a product with
must contact your service agent. When
you buy any of our products we guarantee
the availability of professional repairs and
service. If the retailer who sells your
machine is not a servicing dealer, ask him
for the address of your nearest service
agent.
To do a check of the user interface Aspire P5-P4A
The green LEDs (A) show the state of charge. The
green LEDs also show that the product is on.
1. Push and hold the on/off button (B). (Fig. 35)
a) The product is on when the green LEDs (A) are
on.
b) The product is off when the green LEDs (A) are
off.
Troubleshooting on page 406 if the warning
2. Refer to
indicator (C) flashes.
To do a check of the power trigger lockout
The power trigger lockout prevents accidental operation.
When you release the handle, the power trigger and the
power trigger lockout move back to their initial position.
1. For Aspire PE5-P4A: Push the lock button forward.
(Fig. 36)
2. Make sure that the power trigger is locked when the
power trigger lockout is in its initial position.
a) For Aspire P5-P4A: (Fig. 37)
b) For Aspire PE5-P4A: (Fig. 38)
3. Push the power trigger lockout on one side, and then
on the other side. Make sure that the power trigger
lockout moves back to its initial position.
a) For Aspire P5-P4A: (Fig. 39)
b) For Aspire PE5-P4A: (Fig. 40)
4. Make sure that the power trigger and the power
trigger lockout move freely and that the return spring
operates correctly.
a) For Aspire P5-P4A: (Fig. 41)
b) For Aspire PE5-P4A: (Fig. 42)
5. Start the product, refer to
6. Apply full speed.
7. Release the power trigger and make sure that the
saw chain stops fully.
Safety instructions for the cutting
equipment
WARNING:
instructions that follow before you use the
product.
Operation on page 401 .
Read the warning
1867 - 004 - 19.09.2022